宿州冷库淮海经济区**,引领冷链物流的发展
发布时间:2017-04-02 09:14:23浏览次数:4262
宿州冷库设计安装哪家强?
1、冷库设计安装前的地面或墙体要做一些处理,地面或墙体要能够承受机组的重量自振动。
1, refrigerator design before the installation of floor or wall to do some processing, floor or wall to be able to sustain the weight of the unit vibration.
2、冷库设计安装的部位要方便操作、以及日后的维修、调整。
2, the parts of the refrigerator design and installation more convenient operation, and maintenance and adjustment in the future.
3、严格挑选机组外机的安装地点,机组外机在运转时发生的噪音以及冷(热)风,冷凝水不影响周边人们的工作、学习和生活,所以要谨慎选择。
3, selected units outside the machine installation site, and noise occurs when the operation of the unit outside the machine and wind cold (hot), condensed water does not affect the surrounding people''s work, study and life, so be careful to choose.
4、从安全生产方面考虑,外机组周围不能有可热性气体泄漏或者爆炸物。
4, from the production safety into consideration, there be no crew can hot gas leakage or explosives.
5、冷库设计时,外机尽量安装在背明的地方。
5, cold storage design, outside the machine install where Ming back as far as possible.
室内机组安装位置要注意避免太阳直接照射在机组上,远离热源;冷库内机组的进出风口处,不应设障碍物。
Indoor installation position, should pay attention to prevent sun direct illuminate on the unit, away from heat source; Inside of the unit in and out of the refrigerator FengKouChu and should not be set obstacles.
在测量方面,首先要测量内外机组之间的距离。内外机组之间的距离应小于5米,如果大于5米的话,应准备新的铜管连接;然后测量内、外机组之间的位差,内外机组之间的距离要小于3米,否则会降低冷库机组的制冷能力,从而增大压缩机组负荷,引起过载保护。
In terms of measurement, the first thing to measure the distance between the inside and outside the unit. The distance between the inside and outside the unit should be less than 5 meters, if greater than 5 m, should prepare new brass connection; And then measuring the potential difference between the internal and external unit, the distance between the inside and outside the unit less than 3 m, otherwise it will reduce the cold storage refrigeration capacity of the unit, so as to increase the compression load and overload protection. 本文为宿州冷库原创,转载请注明:http://www.xzldlk.com!谢谢。